What We Do
Fireproofing - DIV 07 81 00
Fireproofing - DIV 07 81 00
Fireproofing - DIV 07 81 00
The art of Spray-Applied Fireproofing is to protect the structural steel (i.e. beams, bar joists, columns, and decks) of a building. The materials, cementitious or intumescent, are installed per a UL design specific for each scenario.
Firestopping - DIV 07 84 00
Fireproofing - DIV 07 81 00
Fireproofing - DIV 07 81 00
Firestopping is what controls and prevents the spread of fire and smoke in the case of an emergency situation. This is performed by sealing penetrant openings, horizontal and vertical joints. UL systems are followed to ensure proper installation and protection of the building.
Services
DIV 07 84 13 - Penetration Firestopping
Penetration firestopping applies fire-resistive materials to the MEP openings (i.e. mechanical ductwork, electrical sleeves or conduits, plumbing pipes, fire alarms or sprinklers) to maintain the fire rating of the wall. These materials are installed by following UL systems and guidelines to prevent the spread of fire, smoke or toxic gases through the opening, and achieve the desired fire rating for the floor or wall assembly.
DIV 07 84 46 - Joint Firestopping
The process of sealing any linear gaps or joints between fire-rated floor and wall assemblies. Specific situations include top of wall, bottom of wall, vertical and horizontal joints. Application will prevent fire, smoke or toxic gases from extending into other areas, and achieve the desired fire rating for the floor or wall assembly.
DIV 07 81 16 - Cementitious Fireproofing
Cementitious fireproofing can be a gypsum-based or portland cement-based product, each called for in different scenarios. A standard density product is used mainly in concealed areas, while a medium/high density product is used in more exposed/high-load areas.
DIV 07 81 23 - Intumescent Fireproofing
Intumescent fireproofing is a paint-like product used to achieve a desired finish. This method of fireproofing is chosen when the structural members are designed to be a visual part of an area. Intumescent can achieve a desired finish from Levels 1 through 5.
JOIN THE TEAM!
Apply here to start your Fireproofing and/or Firestopping career today!